We are as Metadiag possible operate the Cummins Engine Application with your Insite Diagnostic Tool.

SCR Delete / Selective Cataliytic Reduction

DPF Delete / Diesel Particule Filter

EGR Delete / Exhaust Gas Recirculation

CAT Delete / Catalytic Converter

DEF Delete / Diesel Exhaust Fluid

DOC Delete / Diesel Oxydation Catalyser

DPD Delete / Diesel Particule Diffuser

Emission Delete

Urea Delete

Cummins ISX ISC ISB ISL ISM CM2350 CM2250 CM871 CM2150D and more…!

• ISB 6.7 – Euro6 – D / Stage V
• ISF 3.8 – Euro6 – D / Stage V
• ISB 4.5 – Euro6 – D / Stage V
• ISL 9 – Euro6 – D / Stage V
• ISL9N – Euro6 – D
• ISF 2.8 – Euro6 – D
• ISX 12 – Euro6 – D / Stage V
• ISX 15 – Euro6 – D / Stage V
• ISBe 4 Cylinder – Euro6 – D
• ISBe 6 Cylinder – Euro6 – D
• ISMe 6 Cylinder – Euro6 – D
• QSM – Euro6 – D
• QSX – Euro6 – D

What will you need for the tuning operation?

All tuning operations do with, the diagnostic connector on the vehicle.

Only a diagnostic adapter compatible with Insite diagnostic software (Nexiq USB Link, Dearborn DPA, Inline, etc. compatible one other) and laptop via internet connection are enough for the operations.

• Diagnostic Adapter
• Laptop via internet connection

After the tuning;

If it turned on the fault lamp and stored any DTC in ECU, they will be removed.

Torque limitation will be removed and limp mode will be off.

You can remove sensors on the exhaust system.

No need Adblue usage more.

Necessary operations during the tuning:

We will give detailed information like drill DPF, remove sensors, etc. about your operation.

Lifetime Warranty for our Software!

If you don’t touch the software in ECU Flash, It will be work life-time.

Condutions of out of the warranty:

• ECU change
• Software Update on ECU (Please attention to your dealer or service for don’t software update on your vehicle)
• ECU repair (If our tuning not working after repair of ECU)

Don’ t worry, if your software been out of warranty, we can tune again with a special discount for the same vehicle!

Engine Range for Bus

Engine  Power                  Torque                 Emissions

ISF3.8    105 – 125 kW     500 – 600 Nm    Euro VI – D

ISB4.5   112 – 157 kW     650 – 850 Nm    Euro VI – D

ISB6.7   164 – 224 kW     900 – 1200 Nm  Euro VI – D

ISL9        264 – 276 kW     1500 – 1600 Nm               Euro VI – D

ISL9N    209 – 239 kW     1220 – 1356 Nm               Euro VI – D

Engine Range for Coach

Engine  Power                  Torque                 Emissions

F2.8       96 – 130 kW        350 -450 Nm     Euro IV – D

F3.8       105 – 140 kW     500 – 700 Nm    Euro VI – D

B4.5       134 – 157 kW     750 – 850 Nm    Euro VI – D

B6.7       217 – 239 kW     1100 – 1200 Nm               Euro VI – D

L9           276 – 298 kW     1600 – 1700 Nm               Euro VI – D

L9N        239 kW                                1356 Nm             Euro VI -D

X12        265 – 360 kW     1900 – 2300 Nm               Euro VI – D

Engine Range for Truck

Engine  Power                  Torque                 Emissions

F2.8       96 – 130 kW        350 – 450 Nm    Euro VI – D

F3.8       105 – 140 kW     500 – 700 Nm    Euro VI – D

B4.5       134 – 157 kW     750 – 850 Nm    Euro VI – D

B6.7       172 – 239 kW     900 – 1200 Nm  Euro VI – D

L9           276 – 298 kW     1600 – 1700 Nm               Euro VI – D

L9N        209 – 239 kW     1220 – 1356 Nm               Euro VI – D

X12        265 – 360 kW     1900 – 2300 Nm               Euro VI – D

X15        298 – 451 kW     2237 – 2779 Nm               Euro VI – C

Engine Range for Construction Vehicle and Industrial

Engine  Power                  Max Torque       Product Technologies    Certification Level

ISF3.8    75 – 129 kW        600 Nm                DPF/SCR, EGR                    Stage V

ISB4.5   120 – 200 kW     780 Nm                DPF/SCR, EGR                    Stage V

ISB6.7   155 – 326 kW     1375 Nm             DPF/SCR, EGR                    Stage V

ISL9        275 – 430 kW     1846 Nm             DPF/SCR, EGR                    Stage V

ISX12     250 – 382 kW     2305 Nm             DPF/SCR, EGR                    Stage V

ISX15     336 – 503 kW     2779 Nm             DPF/SCR, EGR                    Stage V

Product Range for Stage V (55 – 503 kW)

Engine  Power  Torque Certification Level

F3.8       55 – 129 kW        400 – 620 Nm    Stage V

B4.5       90 – 149 kW        500 – 784 Nm    Stage V

B6.7       116 – 243 kW     746 – 1375 Nm  Stage V

L9           220 – 321 kW     1471 – 1845 Nm               Stage V

X12        250 – 383 kW     1695 – 2299 Nm               Stage V

X15        336 – 503 kW     2169 – 2779 Nm               Stage V

Engine Range for Tier 4 Final / Stage IV (37 – 503 kW)

Engine  Power                  Torque                 Certification Level

QSF2.8  37 – 55 kW          199 – 300 Nm    Tier 4 Final / Stage IV

QSF3.8  55 – 97 kW          376 – 488 Nm    Tier 4 Final / Stage IV

QSB4.5 90 – 129 kW        470 – 705 Nm    Tier 4 Final / Stage IV

QSB6.7 109 – 231 kW     1030 Nm             Tier 4 Final / Stage IV

QSL9      186 – 298 kW     1627 Nm             Tier 4 Final / Stage IV

QSG12  250 – 382 kW     2305 Nm             Tier 4 Final / Stage IV

QSX15   336 – 503 kW     2237 – 2779 Nm               Tier 4 Final / Stage IV

Engine Range for Tier 4 Interim (37 – 503 kW)

Engine  Power                  Torque                 Certification Level

B3.3       45 – 63 kW          214 – 304 Nm    Tier 4 Interim

QSB3.3 63 – 89 kW          376 – 415 Nm    Tier 4 Interim

QSB4.5 82 – 125 kW        470 – 624 Nm    Tier 4 Interim

QSB6.7 109 – 224 kW     658 – 990 Nm    Tier 4 Interim

QSL9      172 – 298 kW     915 – 1627 Nm  Tier 4 Interim

QSX11.9               261 – 373 kW                    Tier 4 Interim

QSX15   298 447 kW                                      Tier 4 Interim

Engine Range for Tier 3 (45 – 496 kW)
Engine Power Torque Certification Level

B3.3 45 – 63 kW 214 – 304 Nm Tier 3 / Stage IIIA

QSB3.3 60 – 82 kW 371 – 415 Nm Tier 3 / Stage IIIA

QSB4.5 81 – 127 kW 470 – 624 Nm Tier 3 / Stage IIIA

QSB6.7 99 – 205 kW 584 – 900 Nm Tier 3 / Stage IIIA

QSC 153 – 227 kW 915 – 1383 Nm Tier 3 / Stage IIIA

QSL 186 – 272 kW 1085 – 1519 Nm Tier 3 / Stage IIIA

QSM 216 – 298 kW 1478 – 1989 Nm Tier 3 / Stage IIIA

QSX 280 – 496 kW 1825 – 2542 Nm Tier 3 / Stage IIIA

QSK19 377 – 522 kW 2407 – 2755 Nm Tier 3 / Stage IIIA

Engine Range for Tier 2 (45 – 780 kW)

Engine  Power                  Torque                 Certification Level

B3.3       45 – 63 kW          214 – 292 Nm    Tier 2 / Stage II

B Series 60 – 129 kW        294 – 786 Nm    Tier 2 / Stage II

C8.3       138 – 194 kW     856 – 1205 Nm  Tier 2 / Stage II

QSM      186 – 298 kW     1146 – 1898 Nm               Tier 2 / Stage II

QSX       261 – 474 kW     1603 – 2779 Nm               Tier 2 / Stage II

QSK19   563 – 597 kW     3084 Nm             Tier 2 / Stage II

QSK23   567 – 708 kW     3468 – 3928 Nm               Tier 2 / Stage II

QST30   567 – 895 kW     3350 – 5084 Nm               Tier 2 / Stage II

Engine Range for Defence

Engine  Max Power         Max Torque

ISF2.8    110 kW 147 hp  360 Nm

ISF3.8    125 kW 167 hp  600 Nm

ISBe       136 kW 182 hp  650 Nm

ISBe       268 kW 360 hp*970 Nm

ISLe       336 kW 450 hp  1700 Nm

ISMe     306 kW 410 hp  2010 Nm

QSM      298 kW 400 hp  1898 Nm

QSX       496 kW 665 hp  2542 Nm

V903      504 kW 675 hp  1958 Nm